Reduction
RING X 150/110
Eurovent® RING X 110 reduction enables direct connection of the Eurovent® FLEX X duct or the Eurovent® VENTOS X roofing vent with 110 mm diameter pipes.
Application and Technical Data
Eurovent® RING X 150/110 reducer is used for connecting the Eurovent® FLEX X duct or the Eurovent® VENTOS X roof vent directly to ducts with a diameter of 110 mm.
Standing seam
Trapezoidal metal sheet
Flat roofing / shingles
Universal roof tiles
Roof tile
Fotos
Documents
System products
To ensure consistency, tightness and maximum functionality of the ventilation installation, Eurovent® RING X 150/110 should be used in combination with:
- Eurovent® system ventilation duct, such as FLEX X or ventilation chimney VENTOS X, which thanks to the 150/110 mm reducer enables direct connection to a duct with a diameter of 110 mm.
- Eurovent® highly vapour-permeable roof membranes, which support proper roof slope ventilation and protect the roof structure against moisture,
- Eurovent® sealing and adhesive tapes, which protect the connections against weather conditions and ensure tightness of the connection area,
- Eurovent® installation and roof access accessories, supporting safe access and proper installation of the entire system.
The use of complete system solutions by Eurovent® guarantees increased durability, stable airflow and tightness of the entire ventilation installation.
GOOD TO KNOW
What is RING X 150/110 used for?
It provides a system transition from a 150 mm connection to a 110 mm duct.
Is a 110 mm diameter suitable for every roof ventilation terminal?
No. The fact that a reducer technically allows this connection does not mean that this cross-section will provide the required airflow in every installation.
Who should decide whether to use a reducer?
Selecting duct diameters is part of the ventilation system design and must be based on the required system performance.
Is RING X used to seal a roof penetration?
No. It is located on the ventilation system side and serves only to connect different diameters.
Is one system reducer preferable to several unrelated adapters?
Yes. A correctly selected system component simplifies the connection, but it must still match the parameters of the entire installation.
