Ventilation duct
FLEXOS X
Eurovent® FLEXOS X flexible duct made of special plastic finished with reduction of a wide range of diameters.
Application and Technical Data
Eurovent® FLEXOS X is used as a component connecting the roof vent with the attic space. It features a wide length adjustment range and angle adjustment, recommended for demanding connections.
Standing seam
Trapezoidal metal sheet
Flat roofing / shingles
Universal roof tiles
Roof tile
Documents
Fotos
System products
To achieve maximum ventilation performance and full system tightness, the ventilation duct Eurovent® FLEXOS X should be used in combination with:
- Ventilation chimneys Eurovent® VENTOS X
- System reducers, connectors and adapters Eurovent® RING X and CLIP X
- Sealing flange Eurovent® SEAL EPDM
- Eurovent® installation accessories and sealing tapes
The use of complete system solutions by Eurovent® ensures effective ventilation, reliable connections between system components and durable tightness of the installation in all weather conditions.
GOOD TO KNOW
When is FLEXOS X used?
When the roof ventilation terminal needs to be connected to a smaller-diameter duct and a short flexible section is also needed to help align the installation.
Are all reduced diameters interchangeable?
No. The duct diameter must be selected according to the ventilation design and the required airflow capacity.
Can the smallest diameter be used simply because it is easier to route?
That is not an appropriate selection criterion. Reducing the cross-section increases resistance and can affect system operation.
Does FLEXOS X replace the entire ventilation duct?
No. It is primarily a connecting component near the roof ventilation terminal.
Can the flexible connection be compressed tightly?
Its effective cross-section must not be restricted. It should be installed to maintain airflow as freely as possible.
