Gutter leaf guard
GUTTER PROTECT
Eurovent® GUTTER PROTECT is a gutter guard that reduces the entry of leaves and other larger debris. Each plastic module is 60 cm long. Defined bending points allow it to fit gutters with a diameter of 90–150 mm, while side hooks secure it to the gutter edge. Modules can be joined to cover the required length.
The guard is resistant to UV radiation and weather conditions.
Advantages:
- Reduces leaves and larger debris entering the gutter
- Fits gutters with a diameter of 90–150 mm
- Side hooks for easy installation
- Connectable modules
- UV resistance
Application and Technical Data
Eurovent® GUTTER PROTECT protects plastic and metal gutters against leaves and other larger debris.
Clean the gutter before installation. Bend the guard at the defined points to match the gutter width, place it in the gutter and secure it to the edge using the side hooks. Adjacent modules can be joined together.
The guard reduces the accumulation of larger debris but does not replace regular inspection and cleaning of gutters and downpipes.
Fotos
Documents
System products
Eurovent® GUTTER PROTECT reduces leaves entering the gutter. When detailing the eaves, also consider Eurovent® products with distinct functions in the roof system:
- Eurovent® eaves flashing – directs water into the gutter and protects the eaves edge against water ingress.
- Eurovent® eaves comb – helps prevent birds entering beneath the roof covering while allowing airflow at the eaves.
- Eurovent® vapour-permeable roof membranes – provide an underlay layer and allow water vapour to escape from the roof build-up.
Select products to suit the roof construction and installation conditions. Correct installation, regular inspection and cleaning help maintain effective roof drainage.
GOOD TO KNOW
What does Eurovent® GUTTER PROTECT protect against?
It helps prevent leaves and other larger debris from entering the gutter and restricting rainwater drainage.
Does it fit different gutter sizes?
Designed folding points allow it to be adjusted to gutters with diameters of approximately 90–150 mm. The actual gutter geometry should still be checked before installation.
How is GUTTER PROTECT installed?
The guard is folded to suit the gutter, inserted inside it and secured to the edge with side hooks. Modules can be connected to cover longer sections.
Does the gutter no longer need cleaning?
No. The guard reduces larger debris but does not eliminate fine dirt or deposits, so periodic inspection and cleaning remain necessary.
Can it be used with metal and PVC gutters?
Yes. It is intended for both metal and plastic gutter systems when properly fitted.
